Do you consider antennas useless because of their inability to pick up channels? Then you must get some information about your antennas that can work pretty well in picking up channels. There can be many reasons that can act as a hurdle between the signals and the receiver of your antenna.
Why My Antenna Is Not Picking Up Channels
Some of the reasons that can stop your antenna from picking up channels can be;
- Obstacles are referred to as any hindrance or blockage that is present between your antenna and the signals. If you are living in a hilly area, the presence of hills is considered an obstacle. If it’s stormy weather, then the heavy wind can act as an obstacle. Even the presence of buildings nearby are also obstacles. All these obstacles are the cause of your antenna not picking up channels.
- The direction of an antenna is also a reason why your antenna is not catching channels. If your antenna’s direction is opposite to the broadcast tower, it will also cause your antenna to not pick any channel. Every antenna is broader from one end while narrower at the other end. Some of them have an arrow-shaped direction. You should not make the mistake of pointing your antenna’s arrow towards the signaling tower. The smaller end must be towards the tower while the bigger end in the opposite direction.
- Programming an antenna with TV is very important. If you have not run an auto-scan after programming the antenna with your TV, you will not be able to get more channels. Most of the TVs are set with cable mode, you must change it into antenna or air mode. This will help your antenna to catch more channel signals in the air with no need to set up a cable system.
- Digital signals are the signals most channels work through. If after setting your TV on antenna mode, it is still not picking any channel, then you must check whether your TV is digital or not. Digital TVs would have no issue picking digital signals through an antenna but if they are not, you must buy a converter.
- Wiring issues are sometimes a cause of hindrance. You must check the wires to the antenna, whether they are properly connected or not. If there would be a break or a split in your wire, this will also not allow the antenna to pick up channels.
Frequently Asked Questions
How can I make an antenna signal stronger?
There can be many ways to strengthen your antenna signal but the most effective way is the addition of an antenna amplifier. It is also known as a booster, that helps in boosting the signals of channels faster than an antenna without an amplifier. You can get lots of channels with good output as well.
How can I test my antenna signals?
In order to test the signal from the antenna, you must turn the meter of the antenna signal On. Then tune in to the lowest broadcast channel. Check the strength of that channel signals and rotate your antenna 360 degrees. Record the signals of the highest strength and keep the direction of signals in a record.
Here are some tips for boosting your TV Antenna Signals:
Wrapping It Up
If you are in a confusion that why my antenna is not picking up channels, there are many easy ways to solve the issue without bothering to call any professional. You must check the direction of your antenna, get rid of the obstacles in the way of an antenna, and program your TV for antenna signals.
You May Also Read